N ° d\'article.:
NY8605EVMProduit D\'Origine:
ChinaFrais De Port De Port:
ChinaCouleur:
BlackMOQ:
1002. protection de l'environnement Lois: RoHS
3. selon sécurité et CEM Critère: WPC 1,2
4. sécurité et CEM approbation : ce / fcc
5. caractéristique électrique : circuit d'essai
Si le test doit être effectué sur un circuit spécifié, veillez à utiliser le circuit suivant. 
6. 15w récepteur de charge sans fil 's travail Mode ： Electromagnétique type d'induction (simple bobine)
7. sortie Puissance ： 15W
8. travail efficace distance: ≤10mm （Recommandé travail
distance 3-5mm）
9. Efficacité: jusqu'à 74% (5V sortie) jusqu'à 80% (9V sortie)
10. travail Fréquence: 110-205KHz
11. sortie tension: 5 ~ 14V (réglable）
12. contrat de travail: WPC1.2
13. détection intelligente: soutien
surintensité protection: soutien
surchauffe protection: soutien
14. Surtension protection: soutien
puissance nominale courant: 1,7A
Surintensité protection valeur: 2.0A
Surchauffe valeur de protection à l'intérieur de la puce : 150 ℃
Les petites et moyennes puissance alimentation électrique sans fil, Grande puissance alimentation électrique sans fil, Four à micro-ondes d'alimentation
Newyea vous fournir la solution de recharge sans fil !
It is suitable for concentrated high-power charging occasions whose routes are more fixed such as public buses, corporate shuttles, and commuter vehicles, and charging occasions which can meet the needs of fast charging of multiple vehicles at the same time. Output current (A): 0～400 Charging interfaces: CCS2 Output voltage range (VDC): 150～1000 Output power: 60kW Dimensions (W×D×H:mm): 840 x 980 x 2000 (in kind prevail)
chargeur résidentiel EV
The AC charger of Mimeng Technology ,with output current from 16S to 32A,has single gun output or dual guns,and can be widely used in public parking lot ,residential parking lot,office building parking lot,shopping mall and other small and medium-sized electric vehicle charging places.
EV type2 AC chargers are available in wall-mounted and floor mountedtypes with output current in 16A,32A and 63A(dual guns). The chargeris reliable, flexible, fast and easy to operate. It is fully tested by author-ities, suitable for public and residential parking lots, highway serviceareas, etc. Output power: 80kW Output voltage(V): AC230/400V IP level: IP55 User Authentication: RFID
Système de charge sans fil
EV type2 AC chargers are available in wall-mounted and floor mountedtypes with output current in 16A,32A and 63A(dual guns). The chargeris reliable, flexible, fast and easy to operate. It is fully tested by author-ities, suitable for public and residential parking lots, highway serviceareas, etc.
This series EV fast chargers adopt European standard interface, integrating setting control, management, query, display, remote monitoring and other functions. The entire charging process is under intelligent control. With dual connector and option-al charging modes, the devices are ideal choices for fast charging at residential area, business premises, party and government organs, enterprises and institutions, car charging network support, etc. Home charger is the single phase 11kW AC charger with maximum 32A output current, specially designed for private use. The charger is equipped with RFID card function for ID authentication to prevent theft of electricity. Only the user with RFID card has access to the charging.
Réseau IPv6 pris en charge
中文官网
français 
English
Deutsch
italiano
español
português
Nederlands
日本語
한국의
Norsk
